Monitor Temperature Humidity Using Iot Telegram Bot On Esp32 In this tutorial we’ll build a simple project that requests esp32 or esp8266 nodemcu temperature and humidity readings using the telegram app. we’ll use a bme280 sensor, but you can use any other sensor . Do you want to receive real time sensor readings, like temperature and humidity, straight to your phone from your esp32? in this tutorial, you’ll learn how to create an esp32 telegram bot to send sensor readings from a dht22 sensor as telegram messages! in addition, we will create a custom telegram command to request sensor data only when needed.
Iot Temperature Humidity Monitor Esp32 Telegram Bot Diy Usthad In this project, we are going to learn to interface a dht22 sensor with an esp32 development board and display the readings in the telegram messenger app using the telegram bot api for esp32. Need to install “dht sensor library by adafruit”. there is a dependency library call “adafruit unified sensor”, which will prompt you to install also. do take note. i am using dht11 with 3 pins : gnd, data, vcc. if you are using dht22, then change accordingly in the code. Esp32 telegram bot that sends you the temperature and humidity when it receives the “ status” command. for this project i used the dht11 sensor, a third party library to read the data. Thermotrack is an iot based system that monitors temperature and humidity, pushes readings to thingspeak, and sends critical threshold alerts through a telegram bot. it’s perfect for smart homes, greenhouses, server rooms, or any scenario where timely environmental awareness matters.
Iot Temperature Humidity Monitor Esp32 Telegram Bot Diy Usthad Esp32 telegram bot that sends you the temperature and humidity when it receives the “ status” command. for this project i used the dht11 sensor, a third party library to read the data. Thermotrack is an iot based system that monitors temperature and humidity, pushes readings to thingspeak, and sends critical threshold alerts through a telegram bot. it’s perfect for smart homes, greenhouses, server rooms, or any scenario where timely environmental awareness matters. We will create a telegram bot that will display the sensor readings to the user whenever they will be requested. any appropriate sensor can be used but for this article, we will use a bme280 sensor which is used to measure temperature, pressure, and humidity. what is telegram?. This project is very simple device for tracing temperature an humidity values of an egg incubator via telegram. it can notify you via telegram bot if sensor values changes. you can also calibrate temp humidity values or change notification settings. In this post you will see how to request esp32 sensor readings using telegram, i.e. we are going to build a system in which we request the sensor readinngs like current temperature and humidity from our phone using telegram messenger. Monitor temperature humidity using iot telegram bot on esp32 esp32ttgotelegramdht.ino.
Comments are closed.