Solved Measuring And Or Extruding From Imported Step File Autodesk Community I want to measure or work with profiles in the shape. say i want to measure the area of an orifice: well, inventor's measure tool won't let me do that. okay, i'll create a solid there instead. The test fixture manufacturer provided a step file of the test fixture and when trying to add holes, i get the error "no target body found to cut or intersect". to make the holes, i'll mark their positions in a sketch, then use the hole tool to make them.
Solved Measuring And Or Extruding From Imported Step File Autodesk Community It sounds like you are on the right track but you are not extruding far enough to clear all of the wall. remember there are ridges on the wall. your sketch in on an outside flat surface so you have to extrude deep enough to penetrate all the surfaces. So i'm having an issue where an imported project that was provided to me as step file, is in meters, not millimeters. so anytime i try to measure anything it goes down to .001m and no finer. my default unit of measure is set to millimeters already so i don't know what else to do to change this. An import fuction that can control the scale on import would be highly appreciated. solved: i include several external step files in my design. there are no issues with the import function as such. Most likely this is cause by bad imported geometry. go to repair environment and un stich all faces. after that stich again and repair existing problems. for more information about this environment take a look here: was this information helpful? need help? ask the autodesk assistant!.
Solved Measuring And Or Extruding From Imported Step File Autodesk Community An import fuction that can control the scale on import would be highly appreciated. solved: i include several external step files in my design. there are no issues with the import function as such. Most likely this is cause by bad imported geometry. go to repair environment and un stich all faces. after that stich again and repair existing problems. for more information about this environment take a look here: was this information helpful? need help? ask the autodesk assistant!. When exporting and converting an autocad plant 3d model (or any drawing containing 3d data) to an step file, the step file is later imported in inches rather than its original millimeters units. the units in the program importing the step file are incorrectly set. You can open a step or iges file in autodesk inventor (create a file). you can also place a step file in an assembly, import an iges file into an existing inventor part file, or place an iges solid body as a component in an assembly. I'm working with an imported step file in inventor, and am looking to extend the lower surface of the body to the work plane. i'm unsure of the best way to do this, but in essence, i want to end up with a solid block, with the upper profile of the imported step file still visible. I have a step file that does not want to cooperate when importing to inventor. as you can see, some of the features are not visible on the dwg file of the ipt. solved: please have patience as i am new to this process.
Solved Measuring And Or Extruding From Imported Step File Autodesk Community When exporting and converting an autocad plant 3d model (or any drawing containing 3d data) to an step file, the step file is later imported in inches rather than its original millimeters units. the units in the program importing the step file are incorrectly set. You can open a step or iges file in autodesk inventor (create a file). you can also place a step file in an assembly, import an iges file into an existing inventor part file, or place an iges solid body as a component in an assembly. I'm working with an imported step file in inventor, and am looking to extend the lower surface of the body to the work plane. i'm unsure of the best way to do this, but in essence, i want to end up with a solid block, with the upper profile of the imported step file still visible. I have a step file that does not want to cooperate when importing to inventor. as you can see, some of the features are not visible on the dwg file of the ipt. solved: please have patience as i am new to this process.
Solved Measuring And Or Extruding From Imported Step File Autodesk Community I'm working with an imported step file in inventor, and am looking to extend the lower surface of the body to the work plane. i'm unsure of the best way to do this, but in essence, i want to end up with a solid block, with the upper profile of the imported step file still visible. I have a step file that does not want to cooperate when importing to inventor. as you can see, some of the features are not visible on the dwg file of the ipt. solved: please have patience as i am new to this process.
Comments are closed.